1. Introduction：

This series of products adopts frame or four-column structure, and can be equipped with oil heating system, steam system, air extraction device, left and right safety doors and automatic lifting doors before and after according to process requirements. The proportional servo system is adopted, which has fast descending speed. During pressing, parameters such as exhaust position, precompression pressure and pressing force can be set, and remote diagnosis function can also be set. It is mainly suitable for the molding process of automobile interior parts.

This hydraulic press can be equipped with servo motor and pump drive, which can save energy by more than 50% and reduce noise by 10-30 decibels.

2. Application:

·Hot pressing of automobile interior parts and hot pressing of other organic materials.

3. Advantages:

·Full digital control of press parameters and closed-loop control of pressure

·No pressure die alignment function, convenient die alignment.

·Multiple preloading and exhaust functions

·Die parameter storage function, fault diagnosis function

·Complete safety devices and safety control systems

4. Optional configuration:

·Upper and lower heating plates with optional heating methods: electric heating, heat transfer oil heating, steam heating and temperature control system.

·Front and rear lifting protective doors, side fixed protective doors and smoke exhaust devices to prevent smoke from being discharged to the workshop.